In ancient times it consisted of a receptacle, usually a stone or wooden, where the coffering or basins were placed in which to wash. Likewise, the area occupied by it in a kitchen is known as a sink. During the century, scrubbing was synonymous with washing glasses. For centuries, the word sink made reference to the sink or bench where the troughs or basins were placed on washing. Here, we will share parts of a sink.
Main parts of a sink
The sink consists of an element of great importance in the kitchen. So when choosing one, you have to take into account many elements, especially which is the suitable sink for the kitchen, according to the needs.
The sink is the core of the domestic kitchen, not only for cleaning but also for food manufacturing. There are many models, sophisticated and delicate, which will also depend on the use or frequency of use that will be given to it.
Faucet
In the plumbing area, a tap consists of a tap used to facilitate, prevent or normalize the passage of a fluid. These keys are placed in the mouth of the pipes or pipes in order to rationalize the use of water.
The taps, similarly known as taps, have a seat key, a threaded stem, and a leather, rubber, or rubber washer. By rotating the tap, the individual opens or closes the water circulation. The mechanism allows or prevents the passage of the liquid.
Usually, in the area of the spout of the tap, a piece with some kind of framework is placed. So, the water does not fall abruptly but subtly like rain.
Supply hoses
The power hoses for your sink are attached to two links at the base of the sink. One link is for hot water and the other is for cold. They are fed directly to the stopcock.
Sink basin
It usually consists of most of the pool, and it is also the most visible. This is the area where the water clumps together and then drains out.
The usual materials in a basin are made of metal, fiberglass, or porcelain. Fiber is seen more in industrial sinks.
P-Trap
It consists of a tube that connects the drainpipe at the sink to the drainpipe placed on the wall. This part is usually marketed as a kit that has the tube, the required washers to prevent leaks, and the locking nuts that hold the p-trap in place. The most common materials for a p-trap are plastic, vinyl, or metal.
Drainpipe
Also known as plumbing drainage, it consists of the primary conduit for unwanted water or liquid waste that will be conducted. Either to an area where it will be used again (but collected in a deposit) or to the sewers. The remains are installed to be processed.
The installation mode and parameters are created to affirm the functionality of the output. For its purpose, it is facilitating changes in volume, material to be moved, and maintenance needs.
Main materials for the manufacture of sinks
There are different classifications or types of kitchen sinks, depending on the material.
Stainless steel sinks
They are the most frequent and a priori also the cheapest, although this is not always true. There are different grades of steel and manufacturing processes. It can make and improve many of the basic features of a stainless steel sink. This type of material for kitchen sinks offers good resistance to shocks and high temperatures. It is also a versatile option for designs, shapes, and possibilities, although not in terms of colors and textures. Perhaps the biggest drawbacks are the visibility acquired by scratches that occur and the loss of shine that lime causes them.
Resin-based sinks
Resin kitchen sinks are much weaker than steel sinks, both from bumps, scratches, and heat. On the other hand, they are available in a wide variety of textures and colors. This is a great option for those looking for design rather than strength.
Quartz sinks
Quartz sinks, like resin sinks, are available in a wide variety of colors and textures. The advantage over the previous ones (although they also have a percentage of resins). It is that quartz provides them with greater resistance to bumps, scratches, and heat. The material is the same as that used for the manufacture of compact quartz countertops. In fact, on some occasions, they are marketed together to make them look like a single piece.
Ceramics
These types of kitchen sinks are in high demand by those looking for rustic or vintage styles. They are very resistant to bumps and scratches, although they can break if they suffer a strong enough blow. Among its main drawbacks are its high price and that its high rigidity can damage the dishes.
Marble or granite
They are manufactured specifically to be integrated into the countertop and offer the characteristics of these materials. Great resistance, although they stain easily.
Synthetics
These are patented materials that allow any type of manufacturing. For example, unique designs where the countertop and sink are integrated without separations. They are high-priced alternatives, and in some cases, also high-performance.
The outlet installation of the sink takes into account the principles related to vacuum, gravity. Also, with the safety of human exposure to biological elements and resistance to malfunction. As well as the simplicity of the parts of sink maintenance and repair is very simple.
You may also like to read HOW TO CLEAN THE KITCHEN DRAIN PIPE?
Tags: basin, main materials, parts of a sink, sink, sink basin
Leave a Reply